Kluber AMBLYGON TA 15/2 45g Tube

Description

Kluber AMBLYGON TA 15/2 Special Grease for Longterm Lubrication, 45g, Kluber Lubrication PN: 0201092232
Special grease for long-term lubrication and high temperatures
AMBLYGON TA 15/2 is a longterm and hightemperature lubricating grease based on mineral oil and polyurea. This lubricating grease is used for longterm or lifetime lubrication in the machinebuilding sector covering a wide service temperature range up to 150 °C. AMBLYGON TA 15/2 offers good adhesion, resistance to hot and cold water and diluted alkaline and acid solutions.AMBLYGON TA 15/2 is resistant to oxidation and ageing and protects against corrosion.
Benefits for your application:
Versatile grease for many applications subject to high loads
Long service life even when exposed to high temperatures or aggressive media
Long service life due to the high resistance to water and water vapour
Long service life due to the excellent adhesion to the friction points
Improved sealing effect due to high adhesion
Low maintenance due to good corrosion protection
Application:
AMBLYGON TA 15/2 lubricates bearings and joints subject to high temperatures and loads, for example in:
-Conveyors
-Kilns (rotary tubular kilns)
-Water pumps
-Hot rollers
-Tarmac laying machines
-Gate valves
-Seals
-Washing machines and dishwashers
-Impact mechanism in power tools
-Joints, hinges
-King pins
AMBLYGON TA 15/2 is also used in combination with mineraloilresistant elastomer seals.
Application notes:
Prior to series application we recommend checking compatibility with elastomers, if possible in the component under conditions similar to actual use.
Product data:
Article number
020109
Chemical composition, thickener
polyurea
Chemical composition, type of oil
mineral oil
Lower service temperature
-20°C / -4°F
Upper service temperature
150 °C / 302 °F
Density at 20 °C
approx. 0.93 g/cm³
Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C
approx. 220 mm²/s
Kinematic viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C
approx. 18 mm²/s
Worked penetration, DIN ISO 2137, 25 °C, lower limit value
285 x 0.1 mm
Worked penetration, DIN ISO 2137, 25 °C, upper limit value
315 x 0.1 mm
Speed factor (n x dm)
approx. 350 000 mm/min
Flow pressure of lubricating greases, DIN 51805, test temperature: -20°C
<= 1 400 mbar
Oil separation, DIN 51817 N, after 7 d/40 °C
<= 5 % by weight
Drop point, DIN ISO 2176
>= 220 °C
Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water
<= 1 corrosion degree
Water resistance, DIN 51807 pt. 01, 3h/90 °C, rating
0 - 90
Minimum shelf life from the date of manufacture in a dry, frostfree place and in the unopened original container, approx.